Plywood, MDF, HDHMR or PPBL which material is better?

One of the most hotly debated topics in the industry is, which material is better - plywood vs. MDF vs. HDHMR vs. PPBL. By the end, you'll know which material interior designers, architects, and homemakers prefer.


Pre-Laminated Particle Board is another low-cost item produced from discarded wood materials. It's manufactured by pressing resin and sawdust together with heat. PPBL is commonly utilised in the production of low-cost home décor furniture. It can also be used as a foundation layer for countertops. Drilling into PPBL is simple, however it does result in a certain amount of tear-out. A particle board's surface is finished with laminate or veneer to improve its appearance. A PPBL is difficult to form and mould because it breaks or chips easily.


  • When compared to other goods such as MDF, solid wood, and plywood, one of the key advantages of a PPBL is its low cost.
  • It's extremely lightweight, making it simple to carry and transport.
  • When compared to MDF, it has a higher ability to hold nails and screws.
  • It's simple to clean and maintain.
  • It's simple to drill, cut, mill, paint, glue, and so on.
  • It's an eco-friendly product created from waste wood materials including sawdust, wood chips, and shavings.


  • When compared to other types of home interior materials like plywood and MDF, PPBL is not as sturdy. Because of its poor strength, it should be handled with caution because it is easily damaged.
  • PPBL has a short lifespan.
  • It has a low resistance to dampness and wetness. One of the major drawbacks of particle boards is this. Particle boards can expand when exposed to dampness.
  • Some types of PPBL are made with a resin that might be damaging to one's health, hence they are not environmentally friendly.


MDF stands for medium-density fibreboard, which is simply engineered wood made from hardwood and softwood composites that have been broken down. There are no apparent wood grains or knots on an MDF board because it is made up of microscopic wood fibres. By exerting pressure or a high temperature, the fibres are bonded together with wax to create panels.

We're sure you're curious about how good or bad an MDF board is now that we know what it's made of.


  • MDF is often less expensive than plywood.
  • An MDF board's surface is extremely smooth, making it an excellent painting surface.
  • Cutting and carving designs out of MDF is simple due to the smooth edges.


  • MDF absorbs water and other liquids like a sponge and swells if not properly sealed.
  • MDF is quite heavy and tough to work with since it is dense.
  • It doesn't hold screws very well because it's made of fine fibre.
  • If not handled carefully, MDF is susceptible to breakage and sagging.


HDHMR is manufactured by using a homogeneous building procedure to combine fibre chips and forest wood waste. These fibre chips are pressed together to form a single layer, removing small amounts of wood to create a denser board.

HDHMR's key selling point is its high density and moisture resistance. It has a strong moisture resistance, making it a popular choice in locations with extreme weather conditions.


Plywood, like MDF, is an engineered wood product manufactured binding veneer wood sheets together into one solid piece. Plywood sheets are available in a variety of grades, allowing you to select the best one for your purposes. Plywood, unlike MDF, has visible wood grains but is devoid of other flaws. Homeowners can use low-grade plywood for flooring, while higher-grade plywood is ideal for cabinets and shelving.

Plywood has a number of benefits that you should think about when having it placed in your home. But, before you jump to judgments, here are some of the pros and cons of plywood that you should consider before purchasing it:


  • Plywood, which is made up of numerous layers of veneer, is a strong material to use at home.
  • It does not absorb liquids or water like MDF does.
  • Plywood is easier to stain because of its grains, making it a perfect material for cabinets and tabletops
  • Because it is made up of layers, plywood holds screws tightly, as each layer offers greater holding for the screw
  • This material is available in a variety of patterns and thicknesses.


  • Plywood is more expensive than MDF, and the greater the grade, the more expensive it is.
  • Due to the layers on the surface of plywood, it must be completed with wood or decorative mouldings.
  • Plywood splinters quickly, and if not cut properly, the edges with layers may have voids.

What is the best choice?

So, which of the following materials should you choose: plywood, MDF, HDHMR, or PPBL? Plywood is a far more durable material that may be used for doors, flooring, stairwells, and even outdoor furniture. Because plywood bends easily, it is easy to construct curved surfaces.


Please fill the form to get access to all our project pics.

Shop No. 3, 1st floor, Sriven grand mall,
Bachupally - Miyapur road, Miyapur, Hyderabad (TX) 500049
email: Phone:  81426 66454